Rack Hardware
7 products
Sort by:
7 products
7 products
RaxGrid® Adjustable Metal Leveling Feet Kit for Server Rack Cabinets, M10 x 60 mm, Set of 4
The RaxGrid® Adjustable Metal Leveling Feet Kit provides a four-piece floor-support solution for compatible free-standing server racks and network cabinets. Designed for cabinet base installations, the set helps support stable placement and allows compatible racks to be leveled when installed on floors that are not perfectly even.
Each kit contains four metal leveling feet with a documented M10 x 60 mm configuration. The accessories catalog identifies this model as part of the caster, feet, and floor-fixing base group, alongside other cabinet mobility and floor-support accessories.
The adjustable threaded design allows the feet to be integrated with compatible rack cabinet mounting points. This makes the kit useful for new cabinet installations, replacement leveling feet, or rack configurations where fixed floor support is preferred instead of casters.
The complete four-piece set has a documented net weight of 0.44 kg (0.97 lb) and gross weight of 0.54 kg (1.19 lb). The source does not provide an individual-foot load rating, total set load capacity, adjustment range, pad diameter, or cabinet-by-cabinet compatibility list, so those specifications are intentionally not assumed.
RaxGrid® Adjustable PVC Leveling Feet Kit for Rack Cabinets, M10 x 35 mm, Set of 4
The RaxGrid® Adjustable PVC Leveling Feet Kit provides a four-piece leveling solution for compatible free-standing server racks and network cabinets. Designed as part of the cabinet base accessory system, the feet help support stable floor placement and allow compatible rack installations to be leveled where required.
Each kit includes four PVC leveling feet with a documented M10 x 35 mm configuration. The threaded design allows the feet to be integrated at compatible cabinet base mounting points, providing a practical alternative or replacement for supported rack installations that use leveling feet rather than casters.
Leveling feet are particularly useful when installing equipment cabinets on floors where minor height adjustment is needed to establish a stable cabinet position. The accessory catalog groups these components with casters and floor-fixing hardware used for free-standing cabinet base configurations.
The complete four-piece RaxGrid® set has a documented net weight of 0.20 kg (0.44 lb) and gross weight of 0.30 kg (0.66 lb)
The RaxGrid® PL400 Outdoor Pole Mounting Kit provides a mounting solution for compatible outdoor network and equipment cabinets installed on large-diameter poles in telecom, surveillance, wireless, fiber, and infrastructure environments.
Designed as a clamp-type pole mounting system, the PL400 configuration is intended for poles up to approximately 400 mm / 16 inches in diameter. Its expanded diameter range makes it the largest of the current PL150, PL300, and PL400 mounting options and is suited to applications where substantial pole structures are already available at the equipment location.
The system allows compatible outdoor enclosures to be positioned directly on a pole instead of requiring a conventional wall or building mounting surface. This can be useful for remote network nodes, CCTV infrastructure, wireless installations, fiber distribution, telecom equipment, and other distributed systems.
Pole-mounted installation can also help locate electronics closer to cameras, antennas, connectivity points, and other field equipment while keeping devices organized within a dedicated outdoor enclosure.
The PL400 model is specifically intended for applications requiring accommodation of poles up to approximately 16 inches in diameter, helping installers match the mounting hardware to the physical infrastructure at the installation site.
The RaxGrid® PL300 Outdoor Pole Mounting Kit provides a practical solution for installing compatible outdoor network and equipment cabinets on larger poles where conventional wall mounting is not available or appropriate.
Designed as a clamp-type pole mounting system, the PL300 configuration is intended for poles up to approximately 300 mm / 12 inches in diameter. This larger mounting range makes it suitable for network, telecom, surveillance, wireless, fiber, and other field infrastructure installations using medium-to-large pole structures.
The kit creates a mounting interface between a compatible outdoor enclosure and the supporting pole, helping installers position equipment closer to cameras, antennas, network drops, fiber connections, wireless devices, or other distributed infrastructure.
Clamp-style installation also provides an alternative to mounting directly to a building or wall surface. For outdoor projects where equipment must be positioned at the point of service, a pole-mounted enclosure can help make better use of existing infrastructure while keeping network and electronic equipment organized in a dedicated cabinet.
The PL300 model is sized for poles up to approximately 12 inches in diameter, allowing installers to select the RaxGrid® pole-mount accessory according to the physical pole used at the installation site.
The RaxGrid® Outdoor Pole Mounting Kit provides a practical mounting solution for installing compatible outdoor network and equipment cabinets on poles where traditional wall mounting is not available or appropriate.
Designed as a clamp-type pole mounting system, this PL150 configuration supports poles up to approximately 150 mm / 6 inches in diameter. The kit is intended to create a secure mounting interface between a compatible enclosure and the supporting pole, making it useful for distributed network, telecommunications, surveillance, and infrastructure installations.
Pole mounting can be especially valuable for applications such as remote networking, CCTV systems, wireless infrastructure, fiber deployments, utility sites, and other installations where equipment needs to be positioned near the point of service. By moving compatible cabinets off the ground and onto an existing pole structure, the mounting kit can help make better use of available installation space.
The clamp-style configuration is designed for installations where wrapping or clamping around the pole is preferred over drilling directly into the pole structure. This also makes the accessory useful where installation flexibility and future service access are important considerations.
The PL150 model is specifically sized for poles up to 6 inches in diameter, helping installers choose the appropriate RaxGrid® pole-mount accessory based on the pole being used.
RaxGrid® 4-Pack Caster Kit for Free-Standing Rack Cabinets, 2 Locking + 2 Non-Locking Swivel Casters
The RaxGrid® 4-Pack Caster Kit adds rolling mobility to compatible free-standing rack cabinets and rack frames. Supplied as a complete four-caster set, it includes two casters with brakes and two casters without brakes, giving installers a combination of mobility and position control for supported cabinet installations.
The accessories catalog describes the caster sets as providing 360-degree mobility and identifies them as part of the base accessory group for free-standing cabinets. Adding casters can make it easier to reposition a rack during installation, cabling, equipment changes, cleaning, or maintenance compared with a cabinet installed directly on fixed feet.
For model AA-TKR5525-A-PS, the catalog lists 55 mm width and 25 mm depth in its dimensional fields. The complete four-piece set has a documented net weight of 2.0 kg (4.41 lbs) and gross weight of 2.2 kg (4.85 lbs).
RaxGrid® 50-Pack M6 Rackmount Cage Nut, Screw & Washer Hardware Kit
The RaxGrid® 50-Pack M6 Rackmount Hardware Kit provides a convenient set of fastening hardware for installing compatible equipment and accessories in server racks, network cabinets, telecom enclosures, and other rack systems that use M6 cage-nut mounting.
Each set contains 50 M6 cage nut assemblies with screws, nuts, and washers, giving installers a practical quantity of hardware for rack equipment installation, accessory mounting, replacement, and maintenance. The accessories catalog lists this model as part of the Fixing Hardware / Baying Kit range and specifically identifies it as an M6 cage nut set, 1 set / 50 pieces.
M6 rack hardware is useful when mounting compatible shelves, cable-management accessories, patch panels, rackmount equipment, and other devices to square-hole rack rails. Keeping a dedicated 50-piece hardware kit on hand can also simplify future rack changes, equipment additions, and service work.
The complete set has a documented net weight of 0.39 kg (0.86 lb). The catalog does not specify individual screw length, washer dimensions, plating, or finish for this particular set, so those details are intentionally omitted.
